Tropical Fish Mob Statues (3072 of them!!!)
682
Minecraft Maps
Yep, that's right. I created 3072 Tropical Fish Mob Statues at a 1 pixel : 4 block scale! This scale is a bit bigger than my usual mob statue scale, but the fins just looked too bulky on the 1:2 scale. I guess I will stick with 1:4 for all the small mobs in the future.
Why did I make so many fish statues? Not sure, but somebody had to do it :D
The tropical fish mob comes in 12 basic shapes (see gallery). Each can have one of 16 colors for the body and one of 16 colors for the pattern. This gives you 3072 variants of the mob (in the game itself, only 2700 variants can naturally spawn since they never come with either a black body or pattern).
Since I didn't feel like making 3072 schematics, I "only" made 384 of them (or 768, since I made them for both WorldEdit and Litematica): For each of the 12 basic shapes I created 16 schematics for the body and 16 for the pattern. Those 384 schematics can be combined to make any variant you want. I made the bounding boxes of all schematics the same (24x49x44) and took care to copy them from the same relative position (relevant for WorldEdit), so they can be easily combined (instructions below).
I also added pre-assembled schematics and a world save for the 22 uniquely named tropical fish (I call them presets).
To top it of, I created a world save that has all 3072 mob statues in it (open in new tab to zoom):
Loading the world and flying through the big fish swarm is really fun! :P
Note: I used concrete powder to have some more blocks in my palette. If you build the statues underwater, those will turn into concrete. There is nothing I can do about that, but I would suggest replacing the concrete powder with wool of the same color, if you want to build underwater.
Instructions for WorldEdit:
Instructions for Litematica:
Feel free to download and use the statues however you like, but please give credit if you do :)
Check out my Mob Statue Collection for more builds like this!
Why did I make so many fish statues? Not sure, but somebody had to do it :D
The tropical fish mob comes in 12 basic shapes (see gallery). Each can have one of 16 colors for the body and one of 16 colors for the pattern. This gives you 3072 variants of the mob (in the game itself, only 2700 variants can naturally spawn since they never come with either a black body or pattern).
Since I didn't feel like making 3072 schematics, I "only" made 384 of them (or 768, since I made them for both WorldEdit and Litematica): For each of the 12 basic shapes I created 16 schematics for the body and 16 for the pattern. Those 384 schematics can be combined to make any variant you want. I made the bounding boxes of all schematics the same (24x49x44) and took care to copy them from the same relative position (relevant for WorldEdit), so they can be easily combined (instructions below).
I also added pre-assembled schematics and a world save for the 22 uniquely named tropical fish (I call them presets).
To top it of, I created a world save that has all 3072 mob statues in it (open in new tab to zoom):
Loading the world and flying through the big fish swarm is really fun! :P
Note: I used concrete powder to have some more blocks in my palette. If you build the statues underwater, those will turn into concrete. There is nothing I can do about that, but I would suggest replacing the concrete powder with wool of the same color, if you want to build underwater.
Instructions for WorldEdit:
- In the download, you will find the WorldEdit schematics in schematics/WorldEdit/tropical_fish. Copy/extract the tropical_fish folder into your WorldEdit schematics directory (usually .minecraft/config/worldedit/schematics).
- Go to where you want the statue to be places (and stay in this position until you are done with one statue!)
- Let's say you want to create a Clayfish with a orange body and a blue pattern. You would construct this statue by executing the following commands:
- //schem load tropical_fish/clayfish/body/orange
- //paste -a
- //schem load tropical_fish/clayfish/pattern/blue
- //gmask !#solid
- //paste -a
- //gmask
- You should now have an orange-blue Clayfish in your world!
- For examples of each type of fish, please look in the media gallery!
- The 22 presets can be imported like this:
- //schem load tropical_fish/presets/anemone
- //paste -a
- consult the Minecraft Wiki for the names of the presets.
Instructions for Litematica:
- In the download, you will find the Litematica schematics in schematics/Litematica/tropical_fish. Copy/extract the tropical_fish folder into your Litematica schematics directory (usually .minecraft/schematics).
- You can then use the schematics browser of Litematica to select the body and pattern you like (there are preview images for each of them) and create placements in your world.
- Paste the body first, then the pattern. For the pattern use "Replace blocks: With non-air".
- Unfortunately, Litematica doesn't support masking (like WorldEdit), so after pasting the pattern, you might have to replace some strings that I used to hold up the concrete powder of the pattern, which cut into the blocks of the body. But it's only a handful (and sometimes none at all), so it should be quick and straightforward.
- For examples of each type of fish, please look in the media gallery!
Feel free to download and use the statues however you like, but please give credit if you do :)
Check out my Mob Statue Collection for more builds like this!
Tropical Fish Mob Statues (3072 of them!!!) Screenshots
Download
Dear youtuber!
Have you a channel youtube and want to bring your Video to quality visitors?
Do you want your video to appear on our website?
Do you want to become partner with us?
Just 3 steps to become our partner:
Step 1: Make video review for mods, addons, plugins, ... which you like
Step 2: Upload this video to youtube and our link to your video description
Step 3: Send the youtube video link via message to http://fb.com/9lifehack or leave a comment in the post. We will add your video in the our post, it will help you have more view.
JOIN to get more youtube view with us!!!!
Have you a channel youtube and want to bring your Video to quality visitors?
Do you want your video to appear on our website?
Do you want to become partner with us?
Just 3 steps to become our partner:
Step 1: Make video review for mods, addons, plugins, ... which you like
Step 2: Upload this video to youtube and our link to your video description
Step 3: Send the youtube video link via message to http://fb.com/9lifehack or leave a comment in the post. We will add your video in the our post, it will help you have more view.
JOIN to get more youtube view with us!!!!
